Computer Forensic Solutions LLC. has provided the computer forensics community with design services for many years. Below are some of the examples of various technologies and design capabilities.

For more information, please email sales@cfs-llc.net

SCSI to IDE external write blocking device, two versions were released with alterations to the low voltage power adapter that supplied power to the external hard drive. Released for OEM production to Guidance Software Inc. under the FastBloc® label.

PCI test unit. This unit was produced to verify operation of IDE address redirection and streaming byte encryption technology. This device was never released for production.

This External / Internal write blocking device was designed for testing the new CoreRESTORE™ chipset. This was the device that introduced the circuitry for IDE hot swapping. Power to the circuit and external low-voltage power adapter is controlled by the front micro switch allowing the write protected hard drive to be safely removed, then replaced while maintaining CPU power. Other devices have been introduced based on this 5 1/4" design. Dual serial ATA and parallel IDE designs are currently in testing.

Inside the External / Internal write blocking device. This unit was used to prove the 48 bit register ATA 133 & 166 write blocking capabilities. Advanced IDE address redirection and byte encryption technology using the CoreRESTORE™ chipset was also refined within this design. The latter technology out paced the write blocking requirements. This design is available for production.

IDE write block or address redirection / encryption as above but packaged in PCI format. PCI bus is used to provide the low voltage power. This design is available for production.

The flagship product, this compact design provides IDE redirection and byte level encryption of data being sent to the hard drive. This initial design is shown attached to the data port of a hard drive. More information on this product can be found at www.coreprotect.com.